DigiTherm

 

 

High precision Digital Alarm Thermometer for measuring internal core temperature.
Needle Probe 100mm (1,6mm dia).
Measuring range: (–199.9°C – 250.0°C) or (–199.9°F – 482.0°F)
Accuracy: +/–0.1 %

---

 

 

Specification

Meas. principle Pt1000 resistive thermometer
Measuring range –199.9°C ... 250.0°C or –199.9°F ... 482.0°F
Resolution 0.1°C or 0.1°F
Precision +/–0.1 % of m.v. +/–2 digit
Nom. temperature 25°C
Ambient condition temperature –30 ... +50°C
relative humidity 0 ... 90%r.F. (not condensing)
Storage temperature –30 ... +70°C
Housing impact–resistant ABS, membrane keyboard, transparent panel,
Front side IP65, integrated pop–up clip for table top or suspended use.
Dimensions 142 x 71 x 26 mm (L x W x D)
Weight approx. 155 g
Power supply 9V–battery, type IEC 6F22 (in scope of supply)
as well as additional d.c. connector (diameter of internal pin 1.9 mm)
for external 10.5–12V direct voltage supply.
Power consumption < 0,20mA (with standard battery > 15000 operating hours)
Display approx. 11 mm high, 4½–digit LC–display with additional elements
Pushbuttons 3 membrane keys for on/off, menu handling, Hold–function, etc.
Hold function by keypress the current measuring will be “frozen” (HLD)
Alerting adjustable alarm rails, alarm sound, display alarm: flashing arrows
Power–Off–function the device will be automatically switched of if no key is pressed or no interface communication takes place for the time of the power–off delay.
The power–off delay can be set to values between 1 and 120 minutes or can be completely deactivated